🐮 Clean Terminals On Car Battery

With the terminals removed, simply add the discs, installing the red disc on the positive post and the green on the negative. Now re-install your battery terminals, positive first, and you're all set. Your car battery is essential to starting your engine. Keep your battery and its posts clean to ensure plenty of starting power when you turn the Spray Wd40 on each terminal and use the toothbrush to scrub off all the deposits and use a clean piece of cloth to wipe it off. Reattach the terminals and make sure to go for the positive one, first this time. Once the whole cleaning process is completed. Use the dielectric grease to coat the terminals. 2. Put one table-spoon of baking soda in to the water and stir it up. 3. Take off the minus (-) battery terminal clamp first and plus (clamp) second. Use a wrench or ratchet with matching socket. 4. Use the toothbrush to apply the baking soda mixture on both the battery terminals and clamps. 3.1 – Tighten the Battery Terminal Screws; 3.2 – Clean the Battery Connection Post; 3.3 – Replace the Battery Cable Terminals; 4 How Do You Replace the Battery Cable Terminals? 4.1 – Inspect the Battery Terminal Style; 4.2 – Cut Your Cable Wires; 4.3 – Add a Heat-shrink Tube; 4.4 – Connect the Assembly and Heat-shrink It This is a tecnique we've been using here for years, to clean battery terminals. It's really easy, I'm just pouring boiling water on it. And it's melting the Slide a piece of heat shrink tubing over the battery cable. Position the stripped end of the battery cable inside the terminal cavity. Use a crimping tool to lock the cable and terminal together. Slide the heat shrink tubing over the terminal base and cable. Use a heat gun, hair dryer or lighter to shrink the tubing. Disconnect the Battery Cables. Use your socket wrench or adjustable wrench to loosen the nut holding the cable onto the negative battery terminal. The terminals will be marked positive and negative. Make sure you disconnect the negative terminal first. Lay the disconnected negative cable carefully to one side, making sure it’s well away from Yes, vaseline is one of the easiest and cheapest things to use on your battery terminals. Using it is very easy too. 1. Wear your pair of gloves and take a tablespoon of petroleum jelly. 2. Slowly remove the battery cables with the help of a wrench. 3. Now rub the petroleum jelly on both the terminals. 4. 6sDNBI.

clean terminals on car battery